/*Modified at 2024-01-21 20:38:08*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-27 18:16:13*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-27 18:16:15*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-27 18:16:50*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-27 18:16:52*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 11:16:20*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 11:16:22*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //W25QXX XIP
    extern s32 ModuleInstall_W25qInstallXIP(const char *TargetFs,s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qInstallXIP(CFG_W25Q_XIPFSMOUNT_NAME,CFG_W25Q_XIP_PART_START,
    CFG_W25Q_XIP_PART_END, CFG_W25Q_XIP_PART_FORMAT);
    //end W25QXX XIP

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 12:08:05*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX XIP
    extern s32 ModuleInstall_W25qInstallXIP(const char *TargetFs,s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qInstallXIP(CFG_W25Q_XIPFSMOUNT_NAME,CFG_W25Q_XIP_PART_START,
    CFG_W25Q_XIP_PART_END, CFG_W25Q_XIP_PART_FORMAT);
    //end W25QXX XIP

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 12:08:07*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 12:08:15*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 12:08:17*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:41:48*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:41:51*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:42:00*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:42:02*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:43:01*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 14:43:03*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //W25QXX XIP
    extern s32 ModuleInstall_W25qInstallXIP(const char *TargetFs,s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qInstallXIP(CFG_W25Q_XIPFSMOUNT_NAME,CFG_W25Q_XIP_PART_START,
    CFG_W25Q_XIP_PART_END, CFG_W25Q_XIP_PART_FORMAT);
    //end W25QXX XIP

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 17:44:04*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX XIP
    extern s32 ModuleInstall_W25qInstallXIP(const char *TargetFs,s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qInstallXIP(CFG_W25Q_XIPFSMOUNT_NAME,CFG_W25Q_XIP_PART_START,
    CFG_W25Q_XIP_PART_END, CFG_W25Q_XIP_PART_FORMAT);
    //end W25QXX XIP

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 17:44:07*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 17:44:12*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-03-28 17:44:15*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-05-31 17:21:17*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-05-31 17:21:24*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-05-31 17:21:39*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}

/*Modified at 2024-05-31 17:21:45*/
/****************************************************
 *  Automatically-generated file. Do not edit!	*
 ****************************************************/

#include "project_config.h"
#include "djyos.h"
#include "stdint.h"
#include "stddef.h"
#include "cpu_peri.h"
#include <Iboot_info.h>

#include <djyfs/filesystems.h>

extern ptu32_t djy_main(void);
//如果这个CN_MANUFACTURER_NAME名字要改，那djysrc里的Iboot_info.c中相应的名字也要改
const char CN_MANUFACTURER_NAME[] = PRODUCT_MANUFACTURER_NAME;



ptu32_t __djy_main(void)
{
    djy_main();

	return 0;
}

void Sys_ModuleInit(void)
{
	uint16_t evtt_main;

    //shell
    extern void Stdio_KnlInOutInit(char * StdioIn, char *StdioOut);
    Stdio_KnlInOutInit(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME);
    extern s32 ModuleInstall_Shell(ptu32_t para);
    ModuleInstall_Shell(0);
    //end shell

    //----------------------------early----------------------------//

    //device file system
    extern s32 ModuleInstall_dev(void);
    ModuleInstall_dev();    // 安装设备文件系统；
    //end device file system

    //djybus
    extern bool_t ModuleInstall_DjyBus(void);
    ModuleInstall_DjyBus ( );
    //end djybus

    //iicbus
    extern bool_t ModuleInstall_IICBus(void);
    ModuleInstall_IICBus ( );
    //end iicbus

    //message queue
    extern bool_t ModuleInstall_MsgQ(void);
    ModuleInstall_MsgQ ( );
    //end message queue

    //multiplex
    extern bool_t ModuleInstall_Multiplex(void);
    ModuleInstall_Multiplex ();
    //end multiplex

    //spi bus
    extern bool_t ModuleInstall_SPIBus(void);
    ModuleInstall_SPIBus();
    //end spi bus

    //cpu onchip spi
    bool_t ModuleInstall_SPI(u8 SPI_port);
    #if CFG_SPI0_ENABLE==1
    ModuleInstall_SPI(CN_SPI0);
    #endif
    #if CFG_SPI1_ENABLE==1
    ModuleInstall_SPI(CN_SPI1);
    #endif
    //end cpu onchip spi

    //cpu onchip uart
    extern ptu32_t ModuleInstall_UART(ptu32_t SerialNo);
    #if CFG_UART0_ENABLE ==1
    ModuleInstall_UART(CN_UART0);
    #endif
    #if CFG_UART1_ENABLE ==1
    ModuleInstall_UART(CN_UART1);
    #endif
    #if CFG_UART2_ENABLE ==1
    ModuleInstall_UART(CN_UART2);
    #endif
    //end cpu onchip uart

    //fat file system
    extern s32 ModuleInstall_FAT(const char *dir, u32 opt, void *data);
    ModuleInstall_FAT(CFG_FAT_MOUNT_POINT, CFG_FAT_MS_INSTALLUSE, CFG_FAT_MEDIA_KIND);
    //end fat file system

    //cpu onchip timer
    extern bool_t ModuleInstall_HardTimer(void);
    ModuleInstall_HardTimer();
    //end cpu onchip timer

    //cpu_dma
    extern void DMA_Init(void);
    DMA_Init();
    //end cpu_dma

    //ioiicconfig
    bool_t ModuleInstall_init_ioiic(const char * busname);
    ModuleInstall_init_ioiic(CFG_IO_IIC_BUS_NAME);
    //end ioiicconfig

    //kernel
    #if(CFG_OS_TINY == flase)
    extern s32 kernel_command(void);
    kernel_command();
    #endif
    //end kernel

    //Nls Charset
    extern ptu32_t ModuleInstall_Charset(ptu32_t para);
    ModuleInstall_Charset(0);
    extern void ModuleInstall_CharsetNls(const char * DefaultCharset);
    ModuleInstall_CharsetNls("C");
    //end Nls Charset

    //gb2312 charset
    extern bool_t ModuleInstall_CharsetGb2312(void);
    ModuleInstall_CharsetGb2312 ( );
    //end gb2312 charset

    //utf8 charset
    extern bool_t ModuleInstall_CharsetUtf8(void);
    ModuleInstall_CharsetUtf8 ( );
    //end utf8 charset

    //norflash W25QXX
    extern s32 ModuleInstall_W25qxx(void);
    ModuleInstall_W25qxx();
    //end norflash W25QXX

    //W25QXX FAT
    extern bool_t ModuleInstall_W25qxxInstallFat(const char *TargetFs, s32 bstart, s32 bend, u32 doformat);
    ModuleInstall_W25qxxInstallFat(CFG_W25_FAT_MOUNT_NAME,CFG_W25_FAT_PART_START,CFG_W25_FAT_PART_END,CFG_W25_FAT_PART_FORMAT);
    //end W25QXX FAT

    //----------------------------later----------------------------//
    //stdio
    #if(CFG_STDIO_STDIOFILE == true)
    extern s32 ModuleInstall_STDIO(const char *in,const char *out, const char *err);
    ModuleInstall_STDIO(CFG_STDIO_IN_NAME,CFG_STDIO_OUT_NAME,CFG_STDIO_ERR_NAME);
    #endif
    //end stdio

	evtt_main = DJY_EvttRegist(EN_CORRELATIVE,CN_PRIO_RRS,0,0,
		__djy_main,NULL,CFG_MAINSTACK_LIMIT, "main function");
	//事件的两个参数暂设为0,如果用shell启动,可用来采集shell命令行参数
	DJY_EventPop(evtt_main,NULL,0,0,0,0);

    //----------------------------medium----------------------------//
    //heap
    #if ((CFG_DYNAMIC_MEM == true))
    extern bool_t Heap_DynamicModuleInit(void);
    Heap_DynamicModuleInit ( );
    #endif
    //end heap



	return ;
}